Overview
Some products need metallization. There are many methods for metallization of ceramic surfaces. Our most commonly used method is the molybdenum-manganese method. Special Mo-Mn metal slurry is applied to the ceramic surface by screen printing or manual paste application, and then dried on an automatic baking line and sintered at high temperature to form a metallization layer. Ceramic surface metallization can be applied to ceramic-metal sealing.
Advanced Ceramic Metallization
Ceramic metallization involves bonding a metal layer (e.g., Mo, Cu, Ag) to advanced ceramics (Al₂O₃, AlN, SiC) to enable electrical conductivity, thermal management, or structural integration. Key methods include magnetron sputtering, Mo-Mn sintering, and active metal brazing. For example, magnetron sputtering deposits ultra-thin, high-purity metal films (e.g., Zr or Ti) with adhesion strength exceeding 30 MPa, ideal for high-frequency circuits.
Key Techniques & Advantages
-
Magnetron Sputtering:
-
Process: Uses argon plasma to bombard a metal target (e.g., Zr), depositing a uniform layer (50–200 nm) under vacuum (4.5–5.5×10⁻¹ Pa).
-
Benefits: High precision (±0.01 mm), minimal thermal damage, and compatibility with complex geometries like turbine blades.
-
-
Active Metal Brazing:
-
Materials: Ti-, Zr-, or Hf-based alloys react with ceramics to form interfacial compounds (e.g., Ti₃AlC₂), achieving shear strength >50 MPa.
-
Applications: Aerospace engine components and semiconductor packaging.
-
-
Direct Bonded Copper (DBC):
-
Mechanism: Bonds Cu foil to Al₂O₃/AlN via eutectic Cu-O phases at 1,065–1,083°C, enabling thermal conductivity up to 200 W/mK.
-
-
Mo-Mn Method:
-
Steps: Apply Mo-Mn paste, sinter at 1,400–1,600°C to form a glass-phase bond. Modified with oxides (Y₂O₃, ZrO₂) to reduce sintering temps to 1,300°C.
-
Applications
-
Electronics: AlN substrates with Ag coatings for high-power LED packaging.
-
Energy: SiC-coated Mo layers in SOFCs (solid oxide fuel cells) reduce interfacial resistance by 40%.
-
Aerospace: Thermal barrier coatings (TBCs) on ZrO₂-toughened alumina for hypersonic vehicles.
Metallization enables ceramics to conduct electricity, essential for substrates and sensors. For instance, AlN ceramics with magnetron-sputtered Ag layers achieve resistivity <10⁻⁴ Ω·cm, supporting 5G RF devices. The process also enhances thermal dissipation, reducing junction temperatures by 30% in high-power modules.
The Mo-Mn method forms a glass-phase layer during sintering, which chemically bonds to both ceramic and metal. Adding Y₂O₃ reduces sintering temperatures to 1,300°C, minimizing thermal stress. This increases bond strength by 60% compared to traditional methods, ideal for vacuum tubes and microwave components.
Low conductivity (e.g., ZrO₂: 2–3 W/mK) causes heat buildup during sintering, leading to cracks. Solutions include gradient heating (5°C/min) and using nano-sized metal powders to enhance interfacial contact. Laser-assisted sintering further reduces thermal stress, achieving defect-free coatings.
Yes. For example, SiC components with TiN coatings resist HCl (pH <1) and NaOH (pH >12) corrosion. Post-coating passivation (e.g., anodizing) improves durability, extending service life in chemical pumps by 5x.